Mastics

Scope of Delivery: - Pipe thread sealant WEICONLOCK® AN 305-77 medium strength high viscosity Product Description: free of labelling - with DVGW approval - NSF P1 registered (Reg.No. 159910) - BAM tested and assessed for safety - for gaseous oxygen - highly viscous (24,000-70,000 mPa.s) - can be dismantled normally - gap bridging: max. 0.50 mm - thread size: up to M 80 R 3" - breakaway torque: 18-22 Nm (determined on screws M 10, quality 8.8, nut height 0.8.d) - hand-tight between 15-30 min. (at room temperature) - final strength after 1-3 hours (at room temperature) - temperature-resistant from -60 °C to +150 °C Technical Data: - Colour: yellow - Functional strength: 1-3 hours - Hand-setting: 15-30 minutes - Temperature resistance: -60 to +150 °CFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - Screw/stud locking WEICONLOCK® AN 302-70 10 ml Product Description: high-strength - with DVGW approval - difficult to dismantle - medium viscosity (500 mPa.s) - gap bridging: max. 0.15 mm - thread size: up to M 20 R ¾" - breakaway torque: 28-35 Nm (determined on screws M 10, quality 8.8, nut height 0.8.d) - hand-tight after 10-20 minutes (at room temperature) - end-strength between 3-6 hours (at room temperature) - temperature-resistant from -60 °C to +200 °C Technical Data: - Gap bridging max.: 0.15mm - Colour: greenFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - AA210 plastic adapter tube Product Description: Plastic - for processing Illbruck 1C PUR assembly foams with 2 in 1 valve Technical Data: - Material: PlasticFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - Acrylic LD702 310 ml Product Description: 1-component - for sealing joints indoors with little movement and for sealing joints and connections, e.g. on ceilings, lightweight walls, window sills and roller shutter boxes - suitable for filling cracks and joints in aerated concrete, stone, plaster and wood - can be painted and plastered over - also adheres to damp, absorbent substrates - UV and weather-resistant Technical Data: - Content: 310ml - Processing temperature: +5 to +40°C - Temperature resistance: -25 to +75 °C - Container: CartridgeFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - Adhesive and sealant Flex 310 M® crystal clear Product Description: MS polymer-based - after curing, crystal-clear, permanently elastic adhesive with excellent adhesion (only bond stress-free) to glass, PC, PMMA and acrylic glass - particularly suitable for elastic connections where the adhesive should not or must not be visible ISEGA declaration of no objection as an adhesive in the food industry - silicone, isocyanate and halogen-free - excellent ageing resistance - good UV stability - solvent-free - can be painted over (wet on wet) - temperature-resistant from -40 °C to + 90 °C - can be used in plastics processing, in metal, container and apparatus construction, in the electrical and lighting industry, in trade fair and shop fitting, in ventilation and air conditioning technology Technical Data: - Curing time: approx. 2-3 mm/24 hrs. - Chemical base: Polyoxypropylene - Processing temperature: +5 to +40°C - Temperature resistance: -40 to +90 °CFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - Sanitary silicone Silirub S grey Product Description: acetate-curing, permanently elastic silicone sealant for floor and connection joints in sanitary facilities and damp rooms - for glass sealing and jointing work, joints in bathrooms and kitchens, sealing in cold rooms and container construction as well as sealing in air conditioning systems - very easy to apply - UV-resistant - insensitive to mould - very good adhesion to many materials - temperature resistance -60 °C to +120 °C Technical Data: - Container: CartridgeFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - Pipe/surface seal WEICONLOCK® AN 305-72 white Product Description: with PTFE - DVGW-tested - immediate sealing effect even at low pressures - highly viscous (17,000-50,000 mPa.s) - can be dismantled normally - gap bridging: max. 0.40 mm - thread size: up to M 80 R 3" - breakaway torque: 7-10 Nm (determined on M 10 screws, quality 8.8, nut height 0.8.d) - Temperature-resistant from -60 °C to +150 °C - Hand-tight between 20-40 minutes (at room temperature) - End-tight after 5-10 hours (at room temperature) Technical Data: - Gap filling capacity: max. 0.4 mm - Colour: white - Viscosity: high viscosity - Hand-setting: 20-40min - Thread: max. M80 - Strength: medium strengthFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - Special silicone Black-Seal black Product Description: Resistant to oil, grease and temperature - Moisture-curing - Good ageing resistance - Especially suitable for use in machine, engine and automotive construction - Very good adhesion to steel, aluminium, glass, ceramics, etc. - can be used in gearbox, valve and housing covers, oil pans, oil pumps, water pumps, gearboxes and axles, flanges as well as tanks and containers - temperature-resistant from -60 °C to +280 °C (up to +300 °C for short periods) - skin formation time approx. 7 min. Technical Data: - Building material class: according to DIN 4102: B2 - Curing time: approx. 2-3 mm / 24 h - Processing temperature: +5 to +35°CFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - Sanitary silicone Silirub S transparent Product Description: acetate-curing, permanently elastic silicone sealant for floor and connection joints in sanitary facilities and damp rooms - for glass sealing and jointing work, joints in bathrooms and kitchens, sealing in cold rooms and container construction as well as sealing in air conditioning systems - very easy to apply - UV-resistant - insensitive to mould - very good adhesion to many materials - temperature resistance -60 °C to +120 °C Technical Data: - Container: CartridgeFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - Acrylic Acryrub SWS 310 ml Product Description: High-quality, elastic, single-component sealant based on silanised acrylate dispersion - Building material class B2 (DIN 4102 Part 4) - For permanent, airtight interior sealing of connecting joints between masonry and door or window frames - For joints and cracks in masonry, concrete and plaster in interior areas for joints and cracks in masonry, concrete and plaster in interior areas - for internal sealing on window sills, roller shutter boxes, between skirting boards and floors - very good adhesion to many porous materials, rigid PVC and aluminium - virtually odourless - elastic after curing, corresponds to ISO 11600 F-12.5E - very low emissions - EC1 PLUS licensed - temperature resistance -20 °C to +80 °C - part of the SOUDAL WINDOW SYSTEM (SWS) - silicone-free Technical Data: - Content: 310ml - Temperature resistance: -20 to +80°C - Processing temperature: +5 to +40°C - Container: CartridgeFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1C fire-resistant PU foam FF197 880 ml Product Description: with patented 2 in 1 adapter: can be applied with an installation gun and with an adapter tube - modified, 1-component, fire-resistant polyurethane foam - proof of fire resistance in joints between mineral building components - fire resistance, depending on the respective installation situation: up to 4 hours (EN 1366-4, EN 13501-2) - suitable for filling and sealing linear joints with fire protection requirements - building material class B1 DIN 4102-1 Disposal instructions: Used PU foam cans are hazardous waste and therefore do not belong in the residual waste, yellow bag, construction waste or tinplate containers. Individual cans should be handed in at the municipal hazardous waste collection centre (www.pdr.de/plz-suche), from 6 cartons upwards, a free collection can be requested from PDR Recycling GmbH + Co KG. Phone: 0800 7836736. Further information can be found at www.pdr.de. Technical Data: - Shelf life: 12 months - Colour: grey - Chemical base: Polyurethane - Processing temperature: +10 to +30°C - Temperature range: -40 to +90°C - Container: tinFor commercial use, please observe the building regulations!

Read more less